Certification Topics of HPE2-T37 Exam PDF Recently Updated Questions
HPE2-T37 Exam Prep Guide: Prep guide for the HPE2-T37 Exam
NEW QUESTION # 58
Your customer plans to monitor HPE ProLiant DL systems and HPE BladeSystem using HPE OneView Which license is required to accomplish this task?
- A. HPE One View Global Dashboard license
- B. HPE OneView Advanced license
- C. HPE OneView standard license
- D. HPE composer 2 license
Answer: C
NEW QUESTION # 59
Refer to the exhibit.
After adding SAN Manager to HPE OneView. you noticed that all SANs are in the discovered state. How will this affect HPE OneView storage management capabilities?
- A. Snapshot functionality will be limited only to the volumes not using these SANs.
- B. Volume presentation through server profile will work with the discovered state.
- C. Auto-zoning functionality will not work until SANs are associated with networks.
- D. Volume provisioning will only work for arrays that ate accessible through these SANs.
Answer: B
NEW QUESTION # 60
Your customer asks you if it is possible to perform HPE Synergy initial setup remotely. How should you respond?
- A. HPE Synergy cannot be deployed remotely, as Initial setup must be performed using a local console connection.
- B. Remote HPE Synergy setup is possible if HPE Composer 2 is used and a DHCP server Is available in the management network.
- C. Remote HPE Synergy Installation can be done only if an additional set of the services was purchased together with hardware platform.
- D. HPE Synergy can be configured remotely through a secure connection to the FLM if this option was enabled In the factory.
Answer: B
Explanation:
https://techlibrary.hpe.com/docs/synergy/shared/setup_overview/index.html
NEW QUESTION # 61
Refer to the exhibit.
A customer complains that firmware compliance is empty. The customer confirmed that Synergy Service Pack is uploaded to the HPE OneView repository. How should you respond?
- A. The firmware repository is not defined within firmware compliance report.
- B. The refresh procedure must be performed on each logical enclosure to refresh firmware.
- C. The firmware repository service must be restarted using maintenance connection.
- D. All of the components are up to date and compliant with firmware baseline.
Answer: B
Explanation:
https://support.hpe.com/hpesc/public/docDisplay?docId=sd00001377en_us&docLocale=en_US&page=ts_fw- compliance-unavailable-troubleshooting.html
NEW QUESTION # 62
Refer to the exhibit.
Your customer created multiple networks in HPE OneView, but only Eth-1 is available to be used within a server profile. What is a likely cause of this situation?
- A. The other networks are configured with a purpose other than General or Management.
- B. The other networks have Private Network' selected, which hides them from Compute Modules.
- C. The other networks are not configured with the required Smart Link parameter.
- D. The other networks are not added to the Logical Interconnect Group configuration.
Answer: B
NEW QUESTION # 63
After replacing a failed Compute Module, you notice the server profile Is not automatically assigned to the replaced server hardware. What can cause this issue?
- A. IL0 firmware of the replacement server is different than firmware in broken server.
- B. The replacement server has more memory or CPUs than broken machine.
- C. Server profile affinity is configured to Device Day + server hardware.
- D. The enclosure group has to be updated to match the original enclosure group.
Answer: A
NEW QUESTION # 64
Click option that will allow you to select a FlexNIC function for the specified connection.
Answer:
Explanation:
Explanation:
Auto
NEW QUESTION # 65
Your customer would like to use the second mezzanine slot in an HPE Synergy 480 Genii compute node for dedicated FC connectivity. What is required to use the second mezzanine slot For the compute node?
- A. All memory installed must be the maximum size.
- B. A server profile template must be created.
- C. A second processor must be installed.
- D. An appropriate HPE OneView license is required.
Answer: C
Explanation:
To use the second mezzanine slot in an HPE Synergy 480 Gen10 compute node for dedicated FC connectivity, a second processor must be installed. The second mezzanine slot is electrically connected to the second processor's PCIe lanes. Without the second CPU, the slot is inactive and cannot be used, regardless of any configuration in HPE OneView.
* Option A: While server profiles are necessary, they do not enable hardware components.
* Option B: Memory size does not affect mezzanine slot availability.
* Option C: Licensing does not enable hardware slots; it allows for management features.
NEW QUESTION # 66
What can De defined in a server profile for HPE Superdome Flex?
- A. Complex firmware baseline.
- B. nPartition configuration.
- C. BMC settings.
- D. Ethernet connections.
Answer: B
Explanation:
In a server profile for HPE Superdome Flex, you can define the nPartition configuration. HPE OneView allows administrators to manage nPartitions (nPars), which are hardware-based partitions providing electrical isolation between different partitions of the Superdome Flex server. This includes defining partition boundaries, assigning resources like CPUs and memory, and configuring boot options.
* Option B: While BMC settings are important, nPartition configurations are more specific to Superdome Flex profiles.
* Option C: Firmware baselines can be applied but are not unique to Superdome Flex server profiles.
* Option D: Ethernet connections are typically defined for standard servers, but nPartitioning is a key feature for Superdome Flex.
NEW QUESTION # 67
Your customer wants to configure Quality of Service (QoS) on HPE Synergy frames equipped with HPE Virtual Connect SE 700Gb F32 Modules for Synergy. Which HPE OneView object can be used to define QoS settings?
- A. Logical interconnect group
- B. Enclosure group
- C. Logical enclosure
- D. Fabric manager
Answer: A
Explanation:
To configure Quality of Service (QoS) on HPE Synergy frames equipped with HPE Virtual Connect SE
700Gb F32 Modules, you use the Logical Interconnect Group in HPE OneView. The Logical Interconnect Group (LIG) serves as a template that defines the networking configurations for interconnect modules, including QoS settings, network uplinks, and stacking.
* Option B (Correct): QoS settings are defined within the Logical Interconnect Group, ensuring consistent network configurations across multiple enclosures.
* Option A: Fabric Manager is not an HPE OneView object used for this purpose.
* Option C: Logical Enclosure represents a collection of enclosures but does not define QoS settings.
* Option D: Enclosure Group defines the physical configuration but not the network-specific QoS settings.
NEW QUESTION # 68
Refer to the exhibit.
Which statement about the presented storage pools is true?
- A. HPE OneView can be used to configure replication only between managed storage pools.
- B. All storage pools in the managed state have a valid HPE OneView license applied.
- C. The storage pool in discovered state cannot be used for volume provisioning.
- D. AII storage pools from the system named ThreePAR-1 are managed through external SAN manager.
Answer: A
NEW QUESTION # 69
When should HPE oneView backups be created?
- A. After updating drivers on a host managed by HPE OneView.
- B. Before removing a server profile from HPE OneView.
- C. Before and after upgrading HPE OneView to a new version.
- D. After creating a new VM on a managed hypervisor.
Answer: C
Explanation:
HPE recommends creating backups before and after upgrading HPE OneView to a new version. Backing up before an upgrade ensures you have a restore point in case the upgrade encounters issues. Creating a backup after a successful upgrade captures the current state of the appliance with the new version, allowing for future recovery if needed.
* Option D (Correct): Backups should be created both before and after upgrading.
* Option A/B/C: While backups are important, these actions do not typically necessitate an immediate backup of HPE OneView.
NEW QUESTION # 70
Which server profile template feature is available only for HPE Synergy compute nodes?
- A. Storage connection management
- B. Firmware and drivers update options.
- C. SAN storage management.
- D. Visualization of MACs and WWNs.
Answer: B
Explanation:
The server profile template feature available only for HPE Synergy compute nodes is the Firmware and drivers update options integrated with the HPE Image Streamer. This allows for:
* Stateless Computing: Deploy both firmware and operating system images rapidly.
* Driver Management: Simultaneous management of firmware and drivers through server profiles.
Unique to HPE Synergy:
* HPE Image Streamer: Exclusive to HPE Synergy, enabling deployment of OS images along with firmware updates.
* Enhanced Server Profiles: Include the ability to define the complete software stack in the server profile template.
NEW QUESTION # 71
Your customer built a sever profile for HPE Synergy Gen 10 server and configured boot mode to Legacy BIOS. Which feature Is not available for this Compute Module?
- A. Boot from SAN
- B. Workload profile
- C. BIOS management
- D. Secure boot
Answer: D
Explanation:
https://techlibrary.hpe.com/docs/iss/proliant_uefi/UEFI_TM_030617/s_configure_secure_boot.html
NEW QUESTION # 72
Which statement about access to HPE Onboard Administrator is true when an HPE BladeSystem enclosure is added to HPE OneView?
- A. It is blocked when an HPE BladeSystem enclosure is managed using HPE OneView.
- B. It is enabled when an HPE BladeSystem is either managed or monitored using HPE OneView.
- C. It is enabled only when an HPE BladeSystem enclosure is monitored using HPE OneView.
- D. It is blocked when HPE BladeSystem enclosure is monitored using HPE OneView.
Answer: C
NEW QUESTION # 73
Which locations are supported for HPE OneView remote scheduled backup? (Choose two.)
- A. SFTP
- B. SCP
- C. FTP
- D. HTTPS
- E. HTTP
Answer: A,B
Explanation:
Scheduled to be uploaded to the remote location.
Reference:
https://atrium-consulting.uk/wp-content/uploads/2020/HPE-Synergy-Technical-Workshop-handout.pdf
NEW QUESTION # 74
Your customer wants to add a rack system to HPE OneView. How can this task be completed?
- A. Rack systems can be denned manually using the HPE OneView interface.
- B. Rack systems can be added if the appropriate license is installed.
- C. Rack systems are automatically discovered if they contain a managed server.
- D. Rack systems can only be defined for HPE Synergy components.
Answer: A
Explanation:
To add a rack system to HPE OneView, you can define it manually using the HPE OneView interface.
This involves creating a new rack resource and specifying its properties, such as name, size, and location.
Manually adding racks allows you to organize and visualize your physical infrastructure within HPE OneView, even if the rack contains devices not managed by OneView.
* Option D (Correct): Racks can be manually added via the HPE OneView user interface.
* Option A: No special license is required to add racks.
* Option B: Racks are not automatically discovered; only devices within the racks may be auto- discovered.
* Option C: Rack definitions are not limited to HPE Synergy components.
NEW QUESTION # 75
As a part of troubleshooting, you have to reinstall the same version of the firmware on an HPE Synergy Compute Module. Click the area within the Firmware section of the server profile that will allow you to install the same firmware version.
Answer:
Explanation:
NEW QUESTION # 76
You try to add a new connection within a server profile, but an operation fails when you try to commit the changes.
What is a possible reason?
- A. The server is powered on
- B. The server does not have an HPE OneView license applied
- C. The server is powered off
- D. You tried to add additional connection above the limit
Answer: A
NEW QUESTION # 77
You configured downlink aggregation for one of the HPE Synergy Compute Modules in an environment by placing two connections in the same Link Aggregation Group. After you made the changes to the server profile, its status changed to critical.
What can be done to fix this issue?
- A. Ensure that the Link Aggregation Group time-out value matches the server set values.
- B. Link Aggregation Group functionality should be enabled in advanced properties of the Logical Interconnect.
- C. The teaming or bonding driver in the server OS must be configured to enable the LACP and to form the LAG correctly.
- D. The server profile for a given HPE Synergy compute module should be reapplied, then the Compute Module should be rebooted.
Answer: B
NEW QUESTION # 78
Which statement about managing an HPE BiaoeSystem server is true?
- A. An HPE server blade can be removed from HPE OneView by deleting the server from the Server Hardware section
- B. A multi-enclosure Virtual Connect domain can be imported to HPE OneView without disrupting servers
- C. An HPE server blade cannot be deleted from HPE OneView It must be physically removed from the enclosure
- D. Both c3000 and C7000 HPE BladeSystems enclosures can be imported to HPE OneView for monitoring
Answer: D
NEW QUESTION # 79
Your customer wants to manage their HPE Superdome Flex using HPE OneView.
Which component must be added to HPE OneView to accomplish this task?
- A. Rack Management Controller (RMC)
- B. Baseboard Management Controller (BMC)
- C. all nPARs created within the complex
- D. only the base chassis from the complex
Answer: A
Explanation:
Reference: http://itdoc.hitachi.co.jp/manuals/rv3000/hard/SDF/Server/SDF280/P06150-401a.pdf
NEW QUESTION # 80
Which parameter is defined within an enclosure group for HPE Synergy?
- A. Uplink set configuration
- B. Power supply location
- C. Interconnect type
- D. IL0 addressing method
Answer: A
Explanation:
Within an enclosure group for HPE Synergy, you define the uplink set configuration. The enclosure group acts as a template that specifies how logical enclosures are to be configured, including network connectivity through uplink sets. Uplink sets define the mapping of networks to the physical ports on the interconnect modules, enabling consistent network configurations across multiple enclosures.
* Option B (Correct): Uplink set configurations are defined within the enclosure group to standardize network connectivity.
* Option A: Power supply location is not configured in the enclosure group.
* Option C: While interconnect modules are part of the enclosure group, the specific type is defined in the logical interconnect group.
* Option D: iLO addressing methods are set in the logical enclosure or server profiles, not in the enclosure group.
NEW QUESTION # 81
......
2025 New Preparation Guide of HP HPE2-T37 Exam: https://itcertspass.itcertmagic.com/HP/real-HPE2-T37-exam-prep-dumps.html