Get Perfect Results with Premium C-IBP-2211 Dumps Updated 80 Questions
Free C-IBP-2211 Exam Study Guide for the NEW Dumps Test Engine
SAP C_IBP_2211 Exam consists of 80 multiple-choice questions and has a time limit of 180 minutes. C-IBP-2211 exam covers various topics such as SAP IBP overview, demand planning, inventory optimization, supply planning, and sales and operations planning. C-IBP-2211 exam is designed to test the individual's knowledge in these areas and their ability to apply them in real-world scenarios.
SAP IBP for Supply Chain certification exam validates the candidate's knowledge in the areas of demand, supply, inventory, and response planning. C-IBP-2211 exam tests the candidate's proficiency in implementing and configuring SAP IBP for Supply Chain, including understanding the integration of various modules of SAP IBP. SAP Certified Application Associate - SAP IBP for Supply Chain (2211) certification exam also assesses the candidate's ability to identify key business drivers, configure and execute planning scenarios, and optimize supply chain operations.
NEW QUESTION # 14
Which conditions have to be fulfilled as a prerequisite to maintain a key figure disaggregation?Note:
There are 2 correct answers to this question.
- A. The key figure is stored and all editable.
- B. The key figure is stored and system editable.
- C. The key figure is calculated and all editable.
- D. The key figure is calculated and system editable.
Answer: A,B
NEW QUESTION # 15
You need to use your resource cost effectively with a certain minimum use, even if it means producing more than demand.Which solutions would apply to this scenario?Note: There are 2 correct answers to this question.
- A. Excess stock can be generated and will need to be staged in an overflow warehouse.
- B. Minimum capacity utilization will result in pull production occurring.
- C. Balance can be achieved between excessive prebuild and minimum use by incorporating violation costs.
- D. Capacity leveling will be possible for production and storage resources.
Answer: A,C
NEW QUESTION # 16
Which of the following are capabilities of the Manage Forecast Error Calculations - Inventory Optimization app?Note: There are 2 correct answers to this question.
- A. Adjust Safety Stock Recommendations based on forecast error CV input
- B. Propagate forecast error to upstream locations in a supply chain network
- C. Adjust for forecast bias in Forecast Error CV calculations
- D. Identifiy intermittent demand for Forecast Error CV calculations
Answer: A,C
NEW QUESTION # 17
You want to display and edit data in different Units of Measure (UOM).Which of the following must you consider before you use the UOM?Note: There are 3 correct answers to this question.
- A. Units of measure are usually not time-independent.
- B. Conversion to the target unit of measure is handled by SAP IBP Excel UI
- C. Analytics provide the user with the option to select the target unit of measure.
- D. Units of measure are usually not time-dependent.
- E. Unit of measure is an attribute of a master data type, such as Product.
Answer: C,D,E
NEW QUESTION # 18
What actions can be performed in the Advanced Dashboards application?Note: There are 3 correct answers to this question.
- A. Add process templates.
- B. Display all assigned analytics on a single UI.
- C. Link two analytics charts.
- D. Rename the charts.
- E. Use drill-down functionality.
Answer: A,B,E
NEW QUESTION # 19
Which of the following key functions are supported by SAP IBP for sales and operations?Note: There are 2 correct answers to this question.
- A. Multi-Level Supply Planning Heuristics
- B. Scenario analysis for operational supply planning
- C. Time series analysis
- D. Simple statistical forecast
Answer: A,D
NEW QUESTION # 20
You are working to realign the data due to a recent warehouse closure.What should you be aware of in regards to the realignment steps settings?Note: There are 2 correct answers to this question.
- A. A realignment step can change master data, planning objects and key figures.
- B. The number of steps in the realignment run is limited to 255.
- C. You must mark the realignment step as "shared" and assign the steps to users.
- D. The name of the realignment step should be no longer than 20 characters.
Answer: A,C
NEW QUESTION # 21
Which of the following conditions are relevant for subtotals in the planning view?Note: There are 2 correct answers to this question.
- A. The values of the attribute-based total at the highest attribute level in the planning level can be changed.
- B. The total value can be added before or after the selected attribute.
- C. Only attribute-based totals can be added to the planning view.
- D. The total number of attributes that can use subtotals in the planning view can be restricted.
Answer: B,D
NEW QUESTION # 22
You set up time-series integration using Cloud Integration for Data Services. During the integration process of master data, an error occurred. In the Data Integration app the job failed with status "Fatal Error". How can you find more details about the error?
- A. Navigate to the Master Data Workbook in Excel and open the Log.
- B. Navigate to the Manage Master Data app and open the Log.
- C. Download the Initial Problem Report in the Data Integration app.
- D. Download the Rejection Report in the Data Integration app.
Answer: B
NEW QUESTION # 23
Which of the following data inputs, when increased, will always cause an increase in the safety stock outputs when the Global (multi-stage) Inventory Optimization operator is run?Note: There are 2 correct answers to this question.
- A. Holding Cost Percentage
- B. Target Service Level
- C. Transportation Lead Time Error CV
- D. Minimum Lot Size
Answer: B,D
NEW QUESTION # 24
What are the ways to achieve rolling aggregation with SAP IBP?
- A. Using a local member
- B. Using a attribute as a key figure
- C. Using a appropriate period weight factor
- D. Using a key figure calculation
Answer: C
NEW QUESTION # 25
You created a key figure and want to add calculations.Which of the following rules do you consider?Note: There are 2 correct answers to this question.
- A. The calculation chain for a key figure must always result in a calculated key figure.
- B. Aggregation calculations using SUM or MAX functions must be based on a higher aggregation level.
- C. Key figures can be calculated across different planning levels.
- D. All key figure calculations have calculation inputs, which can be marked as stored or calculated.
Answer: C,D
NEW QUESTION # 26
You are invited to review a problem with a customer's SAP IBP Excel template performance.What areas with the biggest potential performance impact would you focus on?Note: There are 2 correct answers to this question.
- A. Excessive SAP IBP formatting in the Microsoft Excel UI
- B. Complex calculation graphs for key figures
- C. Number of analytics charts displaying key figures' values
- D. Number of local members and complexity of calculations
Answer: A,B
NEW QUESTION # 27
Which of the following data can be tracked using a change-history-enabled key figure?Note: There are 3 correct answers to this question.
- A. Attributes
- B. Key figure type
- C. Modified date
- D. Scenario ID
- E. Reason code
Answer: A,C,E
NEW QUESTION # 28
You need to define a new logic for a key figure to drive values from the PERPRODCUSTREGION level to the PERPRODCUST level.Which of the following configuration options are possible for this process?Note: There are 2 correct answers to this question.
- A. Splitting the values from aggregated to detailed level using multiplication by the proportions
- B. Splitting the values from aggregated to detailed level, based on a stored split-factor key figure
- C. Splitting the values from detailed to aggregated level by using a copy operator
- D. Splitting the values from aggregated to detailed level, based on the time profile attribute
Answer: A,B
NEW QUESTION # 29
Which constraints are taken into account by the Time-Series-Based Supply Planning Heuristic (Infinite)?Note: There are 3 correct answers to this question.
- A. Maximum lot size
- B. Aggregated constraints
- C. Adjusted transport receipts
- D. Minimum lot size
- E. Transportation lead times
Answer: C,D,E
NEW QUESTION # 30
Which of these conditions must be met to create a Local Member key figure?Note: There are 2 correct answers to this question.
- A. Use Excel Cell References in the Report Editor option is selected.
- B. A key figure is selected in the Key Figures tab in the SAP IBP, add-in for Microsoft Excel.
- C. Users should have authorization for template administration.
- D. Activate Local Member Recognition setting is selected.
Answer: C,D
NEW QUESTION # 31
The S&OP Operator Profiles app is used to configure different types of algorithms.Which algorithm- specific settings are unique for only the Time Series-based Supply Optimizer?Note: There are 2 correct answers to this question.
- A. Time profile level
- B. Global cost factors
- C. Processing mode
- D. Discretization
Answer: B,C
NEW QUESTION # 32
You want to maintain key figure values for a new attribute and value combination, using SAP IBP, Add-in for Microsoft Excel, and are receiving an error related to missing combinations.How can you resolve this problem?Note: There are 2 correct answers to this question.
- A. Use the Check Mode operator to create the combinations
- B. Use the Manage Master Data app to create the combinations
- C. Use the Data Integration app to load suitable data that creates the combinations
- D. Use the option New Planning Object in the SAP IBP, add-in for Microsoft Excel
Answer: B,C
NEW QUESTION # 33
Where can the results of a Time Series Analysis be used?Note: There are 2 correct answers to this question.
- A. In the Microsoft Excel add-in, where you can use them to limit and filter your planning views
- B. In Global (multi-stage) Inventory Optimization to calculate time-phased Recommended Safety Stock Outputs
- C. In the Manage Forecast Error Calculations app - Demand Planning app to calculate the Forecast Error CV
- D. During XYZ segmentation in the Manage ABC/XYZ Segmentation Rules app
Answer: B,D
NEW QUESTION # 34
You have to be logged on to two separate SAP IBP tenants.What can help you differentiate the appearance of their user interfaces?Note: There are 2 correct answers to this question.
- A. Add the system name and tenant information from the About section to the Home page.
- B. Setting a separate theme for the Home page in the Web UI.
- C. Having a different set of tiles in the Home group of apps.
- D. Defining a different default planning area via the User Preferences.
Answer: A,B
NEW QUESTION # 35
How can the SAP IBP scenario modeling functionality support business users in the S&OP planning cycle?Note: There are 2 correct answers to this question.
- A. Simulate heuristics run in Supply Review stage
- B. Simulate statistical forecast at the Demand Review stage
- C. Simulate demand sensing inputs for Supply Review
- D. Model inventory turns based on Target Safety stocks
Answer: A,B
NEW QUESTION # 36
......
C-IBP-2211 PDF Dumps Extremely Quick Way Of Preparation: https://itcertspass.itcertmagic.com/SAP/real-C-IBP-2211-exam-prep-dumps.html