Pass Your Huawei Certified Specialist H35-912 Exam Easily with Accurate PDF Questions [Dec 19, 2021]
H35-912 Certification Exam Dumps Questions in here
NEW QUESTION 40
Which of the following is the general cabinet power-on procedure?
- A. Single board switch closed -> chassis module power switch closed -> cabinet input power distribution switch closed
- B. Cabinet input power distribution switch closed -> single board switch closed -> chassis module power switch closed
- C. Chassis module power switch closed -> cabinet input power distribution switch closed -> single board switch closed.
- D. Cabinet input power distribution switch closed -> chassis module power switch closed -> single board switch closed
Answer: D
NEW QUESTION 41
Which of the following does the safety accident work focus on?
- A. Timely notification
- B. Notification after processing
- C. Immediate emergency response
- D. Prevention
Answer: D
NEW QUESTION 42
Which of the following statements are the correct description of the PDU? (Multiple choice)
- A. The input voltage and output voltage of the single-phase AC PDU are both 220V.
- B. The input cable of the three-phase AC PDU is a five-core industrial plug.
- C. The input cable of the single-phase AC PDU is a five-core industrial plug
- D. The input voltage and output voltage of the three-phase AC PDU are both 380V.
Answer: A,B
NEW QUESTION 43
What is the input voltage of the MA5633? (Multiple choice)
- A. 220V AC
- B. 48V AC
- C. 48V DC
- D. 60V AC
Answer: A,D
NEW QUESTION 44
After the network cutover is successful and the customer confirms the normal business data, you can leave the room immediately.
- A. True
- B. False
Answer: B
NEW QUESTION 45
At the job site, construction workers cannot wear casual shoes, slippers, and sandals.
- A. True
- B. False
Answer: A
NEW QUESTION 46
Which of the following statements about the up-and-down about PON technology is correct?
- A. PON technology uplink adopted wavelength is 1490nm
- B. PON technology data downlink uses broadcast
- C. PON technology data uplink uses broadcast
- D. PON technology downlink adopted wavelength is 1310nm.
Answer: B
NEW QUESTION 47
After the cabinet is unpacked, the forklift can be used to carry and lift the steps if necessary.
- A. True
- B. False
Answer: B
NEW QUESTION 48
Which of the following are part of the server survey preparation? (Multiple choice)
- A. Understand the device configuration of the site
- B. Fill in the data sheet of the engineering survey
- C. Print engineering survey data sheet
- D. Communicate with the management of the bureau to determine the time of the survey
Answer: A,C,D
NEW QUESTION 49
Which statements are correct about handling and unpacking inspection in the MA5800 frame series? (Multiple Choice)
- A. Can use sweaty or dirty gloves to touch unpainted metal surfaces of parts or parts
- B. During the handling and installation process, avoid collision of product parts with objects such as doors, walls, shelves, etc.
- C. The equipment and packaging materials of the unpacked boxes should be transferred indoors for proper storage.
- D. It is strictly forbidden to stand and invert the container, and it must be placed according to the direction in which the container is placed.
Answer: B,C,D
NEW QUESTION 50
Huawei's recommended grounding resistance must be less than how much ohms?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: A
NEW QUESTION 51
How many hard disks does the RH8100 V3 Type A front IO module support?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: A
NEW QUESTION 52
When entering the central computer room for "high-risk operation", which of the following actions should be followed? (Multiple Choice)
- A. After the "high-risk operation" is completed, the customer must be reminded to modify the network management password in time.
- B. You can use the "super user" you know to log in to the customer network management system for data operation.
- C. Every carriage return after entering the engine room should be treated as "high-risk operation"
- D. Always keep the cybersecurity attitude of "as thin as ice"
- E. In the implementation of "high-risk operations", be sure to make detailed records of each key data operation at each step.
- F. Always check and confirm the network operation status in the final stage before entering the "high-risk operation" implementation.
Answer: A,C,D,E,F
NEW QUESTION 53
The following are the operations that should be described before the power-on of the communication device. What are the correct descriptions? (Multiple Choice)
- A. The output switch of the power supply device is disconnected and the output voltage is normal.
- B. All power switches of the powered device are disconnected
- C. Measuring no short circuit inside the powered device
- D. Rated output current meets the needs of powered devices
- E. Check the electrical connection is firm and reliable
- F. Measure the power supply circuit without short circuit between each other and the ground
Answer: A,B,C,D,E,F
NEW QUESTION 54
Which one is not a typical product for copper access?
- A. MSAN: such as UA5000
- B. DSLAM: such as MA5600
- C. DSL terminal: such as HG630
- D. ONT: such as HG8145C
Answer: D
NEW QUESTION 55
FTTB refers to fiber to the roadside.
- A. True
- B. False
Answer: B
NEW QUESTION 56
The OceanStor 18000 cabinet is packed in wooden cases and has a good material to accommodate a variety of environments. If the goods do not need to be installed after the customer arrives at the site, you can find open space to store.
- A. True
- B. False
Answer: B
NEW QUESTION 57
When driving, what kind of phone call does we absolutely forbid the driver to use?
- A. Speakerphone
- B. Handheld phone
Answer: B
NEW QUESTION 58
The traditional MSO access network is constituted by HUB room and waht parts, to be called HFC (Hybrid Fiber Coaxial) network? (Multiple Choice)
- A. Optical line terminal
- B. Optical node
- C. Coaxial distribution network
- D. Optical distribution network
Answer: B,C
NEW QUESTION 59
......
Updated H35-912 Exam Practice Test Questions: https://itcertspass.itcertmagic.com/Huawei/real-H35-912-exam-prep-dumps.html