Excellent 3V0-21.21 PDF Dumps With 100% ITCertMagic Exam Passing Guaranted [Feb-2022]
100% Pass Your 3V0-21.21 Advanced Design VMware vSphere 7.x at First Attempt with ITCertMagic
NEW QUESTION 50
An architect is creating a network design for a new vSphere environment.
Based on customer requirements, the environment must support the following types of traffic:
Management
vMotion
vSAN
Fault Tolerance
Virtual machine traffic, which cannot be impacted by other types of traffic Which design recommendation can the architect make for a resilient infrastructure with vSphere network service tiering?
- A. Use different logical networks to ensure traffic is isolated with separate VLANs
- B. Use Network I/O Control and ensure appropriate share value is defined for different types of traffic giving priority to the virtual machines traffic
- C. Use a NIC teaming policy based on the physical NIC load
- D. Use two dedicated virtual switches with a single adapter each, dedicating one virtual switch for Management, vMotion, vSAN and Fault Tolerance traffic, and the second one for virtual machine traffic
Answer: A
NEW QUESTION 51
Refer to the exhibit.
During a requirements gathering workshop, the customer shares the following about their existing ESXi host virtual networking infrastructure:
The customer confirms that:
Each ESXi host has approximately 200 virtual machines.
They want to maximize the number of concurrent virtual machine migrations.
When placing a host in maintenance mode, it takes a long time to evacuate the virtual machines.
Which two recommendations should the architect make in order to help the customer overcome their challenge? (Choose two.)
- A. Configure the network to use MTU for the VMotion VMKernel to 9,000 bytes
- B. Create an additional standard switch with pNIC3 to use for vMotion
- C. Use the 3 pNICs and bundle them in a link aggregation group (LAG) configuration
- D. Configure the network to use MTU for the VMotion VMKernel to 1,600 bytes
- E. Use 10 GbE NICs instead of 1 GbE
Answer: C,D
NEW QUESTION 52
As part of a new hybrid cloud initiative for a large financial company, the customer technical team is presenting an overview of the current state of the infrastructure and their vision for a new solution.
The project team captures notes during the presentation and adds them to the discovery documentation. Which of the listed statements is a design constraint?
- A. The existing storage is out of maintenance
- B. The applications are created in-house with in-guest recovery protection
- C. The maximum tolerable data loss is 10 minutes
- D. The two data center locations have a network latency of 8 ms round-trip time (RTT)
Answer: A
NEW QUESTION 53
An architect is designing a vSphere environment for a customer based on the following information:
The vSphere cluster will have three hosts only due to budget considerations.
A database cluster (node majority) consisting of three virtual machines will be running on the vSphere cluster.
Which two recommendations can the architect make so that the customer achieves the highest level of application availability while taking into consideration operational resiliency? (Choose two.)
- A. Create VM-VM anti-affinity rules
- B. Set das.ignoreinsufficienthbdatastore to true
- C. Set das.respectvmvmantiaffinityrules to false
- D. Create VM-Host anti-affinity rules
- E. Disable vSphere HA during maintenance
Answer: C,D
NEW QUESTION 54
An architect is preparing a design for a customer. Based on requirements, the architect recommends an HCI- based infrastructure with all-flash architecture. During the assessment, it is confirmed that the network throughput generated by virtual machines does not exceed 150 Mb/s.
What is the minimum number and type of network adapters in each server that the architect can recommend to ensure requirements are met and there is no single point of failure?
- A. Two 10 GbE network adapters per server
- B. Two 1 GbE network adapters per server
- C. Four 1 GbE network adapters per server
- D. Four 10 GbE network adapters per server
Answer: D
NEW QUESTION 55
An architect is designing a new greenfield environment that will install ESXi on local disks. There is a requirement to streamline initial and future installations of ESXi hosts.
Which configuration option should the architect recommend for installing ESXi hosts to meet these requirements?
- A. Manual installation using boot from SAN
- B. Installation with kick start script
- C. Auto Deploy with stateful install mode
- D. Auto Deploy with stateless caching mode
Answer: C
NEW QUESTION 56
As part of a requirements gathering workshop, the customer provides the following requirements for the design of a new greenfield virtual infrastructure:
Some applications have a latency that must be less than 5 minutes.
The solution must be able to support a workload growth rate of 10% per year.
Which requirement classification is being gathered for the design documentation?
- A. Recoverability
- B. Manageability
- C. Availability
- D. Performance
Answer: D
NEW QUESTION 57
A new vSphere platform is being created. The platform will host virtual machines that will run management services and line-of-business applications.
What should the architect consider when designing the number and type of clusters required?
- A. The level of isolation required between virtual machine classifications
- B. Predicted platform growth
- C. Auditing requirements for the virtual machines
- D. Maximum tolerable downtime
Answer: A
NEW QUESTION 58
Which design decision must be included in a design to allow for the deployment of a minimum supported configuration of vCenter High Availability (HA)?
- A. The vCenter HA network will support a latency of less than 50 ms
- B. A new subnet will be provisioned for vCenter HA services
- C. The deployed vCenter Server will be Tiny
- D. A vSphere cluster will consist of more than three nodes
Answer: B
Explanation:
Reference:
https://docs.vmware.com/en/VMware-vSphere/7.0/com.vmware.vsphere.avail.doc/GUID-8FD87389-8CC9-4298-8B08-A1526FB44524.html
NEW QUESTION 59
In a meeting to discuss the minimum viable product (MVP) deployment of a new customer-facing application, the key stakeholder shares details of the application components and the application administrators share details of performance and integrity tests for the application.
The application will be made up of the following components:
* A web server
- Steps to confirm the web server is operating correctly will take 15 minutes after the application server is online.
* An application server
- Steps to confirm application server integrity will take 15 minutes after the database is online.
* A database server
- The database server will be managed by a database administrator, with an agreed service-level agreement (SLA) to restore and validate database services within one hour.
The existing VMware infrastructure offers a recovery point objective (RPO) of 5 minutes and recovery time objective (RTO) of 15 minutes through a combination of backups and replication.
In the event of an outage impacting all three application components, how long will it take for the application to recover and complete all checks?
- A. 15 minutes
- B. 90 minutes
- C. 105 minutes
- D. 60 minutes
Answer: A
NEW QUESTION 60
An architect is preparing a design for a company planning digital transformation. During the requirements gathering workshop, the following requirements (REQ) and constraints (CON) are identified:
REQ01 The platform must host different types of workloads including applications that must be compliant with internal security standard.
REQ02 The infrastructure must initially run 100 virtual machines.
REQ03 Ten of the virtual machines must be compliant with internal security standard.
REQ04 The internal security standard specifies logical network separation for in-scope applications.
CON01 The customer has already purchased the licenses as part of another project.
CON02 The customer has five physical servers that must be reused.
Additionally, based on resource requirements, four physical servers will be enough to run all workloads. Which recommendation should the architect make to meet requirements while minimizing project costs?
- A. Use a single cluster and configure DRS anti-affinity rules to ensure internal security compliant virtual machines cannot migrate between ESXi hosts.
- B. Purchase additional servers and plan separate, isolated clusters for workloads that must be compliant with internal security
- C. Use a single cluster and ensure that different security zones are separated at least with dedicated VLANs and firewall
- D. Use Network I/O Control to ensure the internal security zone has higher share value
Answer: A
NEW QUESTION 61
During a requirements gathering workshop, the customer provides the following requirement (REQ) and constraints (CON):
REQ01: The customer is looking for a way to limit database virtual machine (VM) placement to save on CPU licensing costs.
CON01: There is a single cluster with no budget to scale.
CON02: All virtual machines must run on the consolidated cluster.
Which two design decisions should the architect make to meet the customer requirement? (Choose two.)
- A. The solution must use vSphere DRS in manual mode
- B. The solution must use VM-Host affinity rules
- C. The solution must use a vRealize Orchestrator workflow for VM placement
- D. The solution must use VM-VM anti-affinity rules
- E. The solution must use vSphere VM and host DRS groups
Answer: C,E
NEW QUESTION 62
An architect is designing a new backup solution for a vSphere platform that has been recently upgraded to vSphere 7.
The architect wants the backup solution to perform the following:
Full virtual machine image backup and restore
Incremental virtual machine image backup and restore
File level backup and restore within both Windows and Linux virtual machines LAN-free backup Which functional requirement should the architect include in the design of the new backup solution?
- A. The backup solution must leverage VMware vStorage APIs for Data Protection (VADP).
- B. The backup solution must leverage virtual machine snapshots.
- C. The backup solution must leverage the VMware Consolidated Backup (VCB) framework.
- D. The backup solution must leverage VMware vSphere Storage APIs - Data Protection.
Answer: D
NEW QUESTION 63
An architect is tasked with designing a greenfield VMware software-defined data center (SDDC) solution that will be used to deliver a private cloud service for a customer.
During the initial meeting with the service owner and business sponsor, the customer has provided the following information to help inform the design:
* The solution must initially support the concurrent running of 300 production and 600 development virtual machines.
* The production environment should be delivered across two geographically dispersed data centers.
* The development environment must be vSphere-based but does not have to be deployed on-premises.
* The two data centers are connected to each other through multiple diversely routed, high bandwidth and low latency links.
* The customer's server hardware standard document states that all virtual infrastructure hosts must be based on blade architecture only.
* The service owner has said that is important to ensure that neither the availability target of 99.5% nor the resource capacity is affected when the operations team completes maintenance activities, such as the monthly software patching and ad-hoc hardware break/fix.
* All virtual machine backups must be completed using the existing backup service.
* The recovery time objective (RTO) for the service is four hours.
* The recovery point objective (RPO) of the service is 24 hours.
Given the information from the customer, which two would be classified as assumptions within the design?
(Choose two.)
- A. The backup service will store data in a secure facility
- B. The clusters will have a minimum redundancy of N+1
- C. The customer will update their hardware standard to support rack mount servers
- D. All virtual machines will be deployed with the same resource profile for production and development
- E. The backup service has sufficient capacity for the new requirements
Answer: A,C
NEW QUESTION 64
An architect is designing a vSphere environment for a customer and learns that the customer has:
A single vSphere cluster
Two storage arrays with different RAID capabilities
Which two design decisions should the architect make to maximize data availability and data performance for this customer? (Choose two.)
- A. Use multiple datastores for heartbeat.
- B. Use VMDK anti-affinity rules.
- C. Use a minimum of three storage arrays.
- D. Use VM to host DRS rules.
- E. Use Storage DRS.
Answer: A,E
NEW QUESTION 65
......
VMware 3V0-21.21 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
| Topic 6 |
|
Trend for 3V0-21.21 pdf dumps before actual exam: https://itcertspass.itcertmagic.com/VMware/real-3V0-21.21-exam-prep-dumps.html